Rotatek Combi
All pre owned equipment comes with a thorough check from the Rotatek technical team and includes installation and service at your site.
Technical Specification
- Maximum Mechanical Speed:
- 200m/min
- Width Max. Paper Band:
- 450mm
- Width Min. Paper Band:
- 150mm
- Width Max. Impression:
- 430mm
- Rotary Print Format:
- 24″
- Rotary Die-Cutting Formats:
- 24″
- Plate Thickness:
- 0.20mm slot type
- Blanket Thickness:
- 0.90mm adhesive blanket
- Polymer Thickness:
- 1.14mm
- Adhesive Thickness:
- 0.56mm
- Coil Diameter:
- 1000mm
- Shaft Diameter:
- 70mm, 3″, 6″
- Recommended Material:
- Paper, self-adhesive, plastic materials composite
Basic Configuration
- Machine voltage: 400V, 50 Hz, triphasic + N + TT.
- Electric equipment:
- Preset counter/speed marker.
- Centralized lubrication.
- Machine equipped with safety standards CE
- Mechanical transmission:
- Motorized longitudinal register.
- Operator panel with touch screen.
- Coated guide rollers.
- Protection of electrical equipment for voltage surges/drops.
Unwinding Unit
- Hydraulic roll lift.
- One expandable air shaft 76 mm.
- Maximum diameters of paper roll 000 mm.
- Side displacement of the roll during operation of the machine +/- 7.5 mm.
- Pneumatic brake through dancer roller.
- End of roll by acoustic alarm and stop.
- Web splice device.
- Web guide device.
Rotary Offset Printing Units
- Individual main control panel.
- Rotamoll dampening system for UV inks.
- Third form roller.
- Battery reinforcement.
- Dampening system proportional to speed of machine.
- Horizontal webbing.
- Electronic taker.
- Battery pneumatic disengage.
- Ink agitator.
Rotary Flexographic Unit
- Individual main control panel.
- Pneumatic fixing of printing cylinders.
- Open inkpot.
- Anilox cylinder to be defined.
- Rotary printing cylinder format 24”.
Cold Stamping Unit
- Unwind.
- Motorized roller.
- Pressure roller.
- Rewinder.
Lamination Unit
- Unwind.
- Motorized roller.
- Pressure roller.
Rotary Die Cutting Unit
- Support cylinder.
- Anvil cylinder with cutting depth regulation.
- Motorized longitudinal register from main panel.
- Hydraulic pressure control.
- 1 Rotary magnetic cylinder 24”.
Processing Unit
- 1 Position for rotary die cutting, empty.
- 1 Waste rewinder 800 mm.
- 1 Position for length slitting, empty.
- Pulling roller.
- 1 Position for side trimming scissor type equipped with 2 knives and exhauster.
Delivery: Rewinder
- Rewinder with double bench with maximum diameter 000 mm.
- Pneumatic shaft of 76mm.
- Hydraulic coil elevator.
- Antistatic bars.
Other Elements
- Independent command and control desk.
- MODEM connection for remote diagnosis.
- 1 Refrigerator system with alcohol dosifier for dampening system and refrigerated inking rollers.
- 1 Video camera.
- Photocells for transparent material.
- Reprocessing system.
- Chilled rollers in all the units.
Drying System (Höhnle)
V. drying system equipped with total 7 lamps for offset and flexo units